Hey guys. Time has come to draw a line in the sand with this "project" of mine. Its been far too long with the builders and the shell is going to cost too much to get it to where I want it. As a result I have a LOT of OEM and aftermarket parts up for sale. Some are new and some are second hand parts. All parts are very high quality, however. It took me years to gather all of these.
I'll start with the parts I was able to take back today. There's still a lot of stuff up in Paul's garage. Need to get a van some of the days to bring the rest back. I'm going to advertise here first and members here will take preference over international buyers (I'll probably post up on IMOC/MR2OC/Facebook).
The block itself is machine for the Wiseco pistons. I'll get a price for this once I know how much the machining cost, etc.
_KUNENA_BBCODE_HIDEIMG
Turbo kit - €1200
Garrett GT3082 ball bearing turbo with fittings, Tial wastegate and screamer pipe. .82 AR, tial 38mm wastegate(17psi spring), stainless steel 3" downpipe, stainless steel external wastegate, port matched manifold, the downpipe is thermally coated.
From old for sale ad - previous owner:
"I bought this turbo from mr2man with 3000 miles on it. Now the turbo has a bit over 6000 miles on it.
mr2man made 591whp(dynojet), and ran a 10.9 @ 132mph in the 1/4 mile.
I made 496whp(dyno dynamics) and havent been to the track, but last year at 476whp(mustang dyno) I trapped 123.
I made my own braided coolant lines with all AN fittings vs the ATS kit"
_KUNENA_BBCODE_HIDEIMG
_KUNENA_BBCODE_HIDEIMG
_KUNENA_BBCODE_HIDEIMG
Quandry's old clutch
Click here for his thread. I'm asking what I paid for it - €250
Aeromotive FPR
Here's my old for sale thread. Asking €120
External Fuel pump/swirl pot and fittings - €350
The pump is a Bosch 044
_KUNENA_BBCODE_HIDEIMG
How it sits in the boot
_KUNENA_BBCODE_HIDEIMG
Setup
_KUNENA_BBCODE_HIDEIMG
_KUNENA_BBCODE_HIDEIMG
AVT Chargecooler Pump - €140
I'll get a picture of the actual pump if needed but its the same as below.
_KUNENA_BBCODE_HIDEIMG
Huge PWR Barrel type charge cooler and radiator/expansion tank rated to over 1000HP - €440
_KUNENA_BBCODE_HIDEIMG
CarbenFibre Creations carbon dial surround and EL Glow dials €100
_KUNENA_BBCODE_HIDEIMG
Carben Fibre Creations carbon fiber heater surround. €60 but it will come with heater/ac control as its glued on
GReddy Turbo timer - €35
Momo Steering Wheel - it needs a good clean, will get current pictures up soon. Offers?
_KUNENA_BBCODE_HIDEIMG
Carben Fiber Creations carbon Rev2 rear center panel €60
_KUNENA_BBCODE_HIDEIMG
obviously all the panels, lights, fittings, fixtures are for sale but I'd rather not post up everything. If you're looking for a part (or the whole chassis) send me a PM.
Complete replica Border bodykit. Includes front bumper, side skirt sand rear spats - €250
Will get pictures of actual kit shortly. It's made by these guys below. Not sure on fitement.
_KUNENA_BBCODE_HIDEIMG
Apex-i AVC-R and custom courtesy light holder. I believe TBDev Tim made these but not many out there. €350
_KUNENA_BBCODE_HIDEIMG
***removed sold parts from original ad.
