well.ive decided im gonna go with a chargecooler instead of a sidemount an i jus need ta know exactly all the parts that i need.ive a rev 3.ive looked it up but some people seem to go down different routes with regards to the small bits so i just want someones opinion here if theve done it.
st205 chargecooler.
st205 throttle sock
ST205 Throttle cable bracket
cinquento rad+fan switch.

what pump and what pipework is needed?

what other bits are needed..thanks..

Just some part numbers in case you're getting bits from Mr T

2 x Bolts to bolt down CC core - T91631-60816
2 x Long Throttle Body Bolts w/washer - T90119-08870
4 x Throttle Sock Bolts - T91511-B0825
1 x Throttle Sock - T17861-88480
1 x Accel. Bracket - T78024-88480
1 x Throttle Body Support - T17871-88480

I've had st205CC setup in my last 2 and used this pump

www.advancedvehicletuning.co.uk/catalog2...1&products_id=28

I'm collecting parts for a ST205cc setup in current 2 and I found what I think is the same Bosch pump as above for cheaper on eBay. Trying to dig up the link to it - will post when I find it.

I got Hose from a place in Dublin, www.pirtek.ie. Was 25 quid for 10m - you can get it on eBay but a lot of it comes in 30m lengths

You'll also need reducers to go from Cinquecento rad to the hose.

Are you going to Straighliners on Sunday ? I've some of the bits collcted already.

Spidey wrote:
Just some part numbers in case you're getting bits from Mr T

2 x Bolts to bolt down CC core - T91631-60816
2 x Long Throttle Body Bolts w/washer - T90119-08870
4 x Throttle Sock Bolts - T91511-B0825
1 x Throttle Sock - T17861-88480
1 x Accel. Bracket - T78024-88480
1 x Throttle Body Support - T17871-88480

I've had st205CC setup in my last 2 and used this pump

www.advancedvehicletuning.co.uk/catalog2...1&products_id=28

I'm collecting parts for a ST205cc setup in current 2 and I found what I think is the same Bosch pump as above for cheaper on eBay. Trying to dig up the link to it - will post when I find it.

I got Hose from a place in Dublin, www.pirtek.ie. Was 25 quid for 10m - you can get it on eBay but a lot of it comes in 30m lengths

You'll also need reducers to go from Cinquecento rad to the hose.

Are you going to Straighliners on Sunday ? I've some of the bits collcted already.



thats great lad cheers.need all the help i can get.gonna start collecting the parts now and have it done hopefully by x-mas.ill get the reducers and the hoses no problem.only thing is id need a gt4 chassis number ta get stuff from mr t wont i?am no wont be able to make it to straightliners

I ordered from mr t before an didn't need the chasis number from a gt4. I think once you have the part numbers, it should be okay. unless you find a tosser Toyota employee

Where are you going to mount the pump ? Last time, I mounted it inside the passenger side of front bumper. This time, I think I'll mount it in the engine bay.

Spidey wrote:
I ordered from mr t before an didn't need the chasis number from a gt4. I think once you have the part numbers, it should be okay. unless you find a tosser Toyota employee

Where are you going to mount the pump ? Last time, I mounted it inside the passenger side of front bumper. This time, I think I'll mount it in the engine bay.

oh rite.i should be fine so.ya ive come accross them a few times. ya ill prob have it mounted in the engine bay.who did u get to do it or did you do it yourself?

Done it myself - fairly handy job - hardest part is locating all the bolts to take the front bumper off. Running the hose is easy enough once you have the car up in the air a bit.

Spidey wrote:
Done it myself - fairly handy job - hardest part is locating all the bolts to take the front bumper off. Running the hose is easy enough once you have the car up in the air a bit.

oh rite.thats good so.cheers for the info mate.time to start shopping so

does anyone have pics of thier charge cooler conversion thinkin of doin it myself and some pics would help thanks

how did you get on with yours mr.2??

how are things,still havnt really started it yet.only got the chargecooler core.cash is a problem and other things need attention first

thanks for the reply mr.2 where did you get your core from

I've all the parts - all I need now is the time to do it and a nice warm garage

I got my core from a guy on the TBDev forum.

And a great guide here ...

www.imoc.co.uk/forums/viewtopic.php?t=10...ghlight=chargecooler

Although, this time around, I am going to mount my pump in the engine bay.

SMIGGY wrote:
thanks for the reply mr.2 where did you get your core from

no problem.got it off a guy who was breaking one for 70 euro.handy enough.u should be able ta find one no problem.

thanks for the info lads