True Equal Length Gen3 Turbo Manifold 10 Years, 5 Months ago

Karma: 2

Check out the new EMSPowered true equal length Gen3 3SGTE top mount exhaust manifold. Marc finished up the layout this evening finally. The manifold is setup to fit small T3 flanged turbos (GT30/S200), all the way up to the big boys toys (GT40/S300/S400). Yes, you can keep your AC. Yes, it's a true equal length equal frequency manifold.
Here's some photos for now. I'll post more later this week. Enjoy!
_KUNENA_BBCODE_HIDEIMG
_KUNENA_BBCODE_HIDEIMG
_KUNENA_BBCODE_HIDEIMG
_KUNENA_BBCODE_HIDEIMG
_KUNENA_BBCODE_HIDEIMG
_KUNENA_BBCODE_HIDEIMG
_KUNENA_BBCODE_HIDEIMG





Re:True Equal Length Gen3 Turbo Manifold 10 Years, 5 Months ago

Karma: 213

Very Nice !!
How much $$$ is it going to cost ?





Re:True Equal Length Gen3 Turbo Manifold 10 Years, 5 Months ago

Karma: 328

Spidey wrote:
Very Nice !!
How much $$$ is it going to cost ?
+1



"Happier than a tornado in a trailer park"
"Just as in cuisine, the ‘flavor’ of a car is quite important…”
Hiromu Naruse 19432010 RIP


Re:True Equal Length Gen3 Turbo Manifold 10 Years, 5 Months ago

Karma: 314

Nice looking piece!


Quandry
Retro throwback
Administrator
Posts: 6919



Re:True Equal Length Gen3 Turbo Manifold 10 Years, 5 Months ago

Karma: 213

That'd be nice to have your turbo sitting up there  showing off a nice polished housing





Re:True Equal Length Gen3 Turbo Manifold 10 Years, 5 Months ago

Karma: 59

Anaconda!!





Re:True Equal Length Gen3 Turbo Manifold 10 Years, 5 Months ago

Karma: 2

I'll have finished photos and pricing posted in a few days.





Re:True Equal Length Gen3 Turbo Manifold 10 Years, 5 Months ago

Karma: 30

Where's the wastegate port going to exit, and what size?





Re:True Equal Length Gen3 Turbo Manifold 10 Years, 5 Months ago

Karma: 2

WG will exit out of the side of the collector. This particular customer's setup will use one of our TIAL MVS vband wastegates. We can do any size wastegate depending on the customer's needs (38mm, 44mm, 60mm).





Re:True Equal Length Gen3 Turbo Manifold 10 Years, 5 Months ago

Karma: 2

For those that were asking about clearance for the AC idler pulley and the engine hook. Yes, it clears with plenty of room:
_KUNENA_BBCODE_HIDEIMG
Some more updated pics...
Runners welded up:
_KUNENA_BBCODE_HIDEIMG
Runners tacked in place:
_KUNENA_BBCODE_HIDEIMG
_KUNENA_BBCODE_HIDEIMG
_KUNENA_BBCODE_HIDEIMG
_KUNENA_BBCODE_HIDEIMG
_KUNENA_BBCODE_HIDEIMG





Re:True Equal Length Gen3 Turbo Manifold 10 Years, 5 Months ago

Karma: 2

A couple more photos for you guys:
_KUNENA_BBCODE_HIDEIMG
_KUNENA_BBCODE_HIDEIMG





Re:True Equal Length Gen3 Turbo Manifold 10 Years, 5 Months ago

Karma: 314

Nice pics. KC +1


Quandry
Retro throwback
Administrator
Posts: 6919



Re:True Equal Length Gen3 Turbo Manifold 10 Years, 5 Months ago

Karma: 2

with the turbo mounted, still need to finish up the external wastegate port/piping and screamer pipe.
_KUNENA_BBCODE_HIDEIMG
_KUNENA_BBCODE_HIDEIMG
_KUNENA_BBCODE_HIDEIMG





Re:True Equal Length Gen3 Turbo Manifold 10 Years, 1 Month ago

Karma: 2

Another kit that just shipped out.
Custom equal length equal radius exhaust manifold  Precision Billet 6262 ball bearing turbo  Vband 3" stainless steel downpipe  Tial MVR 44mm vband wastegate  vband screamer pipe
_KUNENA_BBCODE_HIDEIMG
_KUNENA_BBCODE_HIDEIMG
_KUNENA_BBCODE_HIDEIMG





Re:True Equal Length Gen3 Turbo Manifold 10 Years, 1 Month ago

Karma: 2

Some questions and answers copied over from MR2OC that you guys may find useful as well:
Nice Work.
How does this compare to a FullRace Manifold. And gains?
I've had this question several times. Several differences actually.
1) Most people that have been around 3SGTE's long enough know that the Gen2 exhaust manifolds tend to warp, and that the 9bolt manifold flanges are superior in keeping the flange from warping at high operating temps. FullRace's Gen2 3SGTE manifold uses a 6bolt flange. That's even worse than the early stock 7bolt stock manifolds. We have proper 9bolt flanges custom cut from 1/2" thick stainless steel that will hold up to the high exhaust gas temps far better.
Full race exhaust flange:
_KUNENA_BBCODE_HIDEIMG
EMSPowered exhaust flange:
_KUNENA_BBCODE_HIDEIMG
2) FullRace 3SGTE manifold runners are NOT equal length. FullRace 3SGTE manifold runners are NOT equal radius. I have called FullRace and one of their reps confirmed this for me over the phone. His exact words "we don't make equal length runner manifolds. They might be close, but it doesn't matter really". Equal length and equal radius runners produce better exhaust flow, better spool, and more power with all other variables kept constant. EMSPowered manifolds have equal length runners, and each runner has the exact same number of degrees of bends. This is a huge advantage.
3) FullRace only makes bottom mount manifolds for the 3SGTE and nothing else. Period. At EMSPowered we make each and every manifold one at a time for each customers exact application. This allows us to customize each kit to best fit the needs of each customer. Topmount, bottommount, crazy long runners and a sidemounted turbo, 3" downpipes, 4" downpipes, single and dual wastegates, long runners, short runners, etc... Basically, with EMSPowered it's not just some "canned" onesizefitsall manifold you're buying. It is custom made FOR YOU.
4) Because we custom make each manifold we are also able to do really cool things like move the turbo position or flange positions to accommodate other power and spool enhancing addons such as quickspool valves. Try that with other manifolds, not going to happen.
I'm sure there's other things I'm missing, but that's a short list of the main differences between us and the rest of the competition.
And, some more eyecandy. A customer's Gen2 3SGTE topmount kit that is being finished up this week. He's using a Comp turbo on this kit:
_KUNENA_BBCODE_HIDEIMG
_KUNENA_BBCODE_HIDEIMG
_KUNENA_BBCODE_HIDEIMG





Re:True Equal Length Gen3 Turbo Manifold 10 Years, 1 Month ago

Karma: 2

Some more top mount kits getting finished up
Gen3 top mount with billet Precision 6262, and 44mm WG:
_KUNENA_BBCODE_HIDEIMG
_KUNENA_BBCODE_HIDEIMG
Gen2 top mount manifold being finished up for a billet Precision 6262 and 44mm MVR Tial WG:
_KUNENA_BBCODE_HIDEIMG
_KUNENA_BBCODE_HIDEIMG





Re:True Equal Length Gen3 Turbo Manifold 10 Years, 1 Month ago

Karma: 213

Great work
Will you be doing a kit for the bw efr range ?





Re:True Equal Length Gen3 Turbo Manifold 10 Years, 1 Month ago

Karma: 2

Spidey wrote:
Great work
Will you be doing a kit for the bw efr range ?
Yes, we carry the EFR turbos and can do any sort of custom turbo kit for you with the Borg Warner EFR series turbos as well.





Re:True Equal Length Gen3 Turbo Manifold 10 Years, 1 Month ago

Karma: 213

baktasht wrote:
Spidey wrote:
Great work
Will you be doing a kit for the bw efr range ?
Yes, we carry the EFR turbos and can do any sort of custom turbo kit for you with the Borg Warner EFR series turbos as well.
So, with an internally gated EFR with integrated BOV and boost control, I can keep the stock manifold. So, what is needed to make an EFR into a "kit" for a Gen3 ?





Re:True Equal Length Gen3 Turbo Manifold 10 Years, 1 Month ago

Karma: 2

Spidey wrote:
baktasht wrote:
Spidey wrote:
Great work
Will you be doing a kit for the bw efr range ?
Yes, we carry the EFR turbos and can do any sort of custom turbo kit for you with the Borg Warner EFR series turbos as well.
So, with an internally gated EFR with integrated BOV and boost control, I can keep the stock manifold. So, what is needed to make an EFR into a "kit" for a Gen3 ?
The EFR turbos have much wider center cartridges than other turbos. With the OEM factory exhaust manifold + adapter most if not all of the EFR turbos will run into the transmission/starter. To use an EFR turbo on the 3SGTE it would require a custom manifold.
If you'd like to use an internally gated EFR turbo on the 3SGTE it'd require a custom exhaust manifold, a custom downpipe and oil/water lines. If you'd like to use an externally gated EFR turbo on the 3SGTE it'd also require an external wastegate and wastegate dumptube in addition to the manifold and downpipe.





Re:True Equal Length Gen3 Turbo Manifold 10 Years, 1 Month ago

Karma: 213

So, could you give a ballpark price on an internally gated EFR kit similar in power to the S252/3071 ?





Re:True Equal Length Gen3 Turbo Manifold 10 Years, 1 Month ago

Karma: 2

Spidey wrote:
So, could you give a ballpark price on an internally gated EFR kit similar in power to the S252/3071 ?
For a full EMSPowered BW EFR kit including the following it would be $2950:
* Borg Warner 6258 or 6758 turbo
* EMSPowered custom equal length equal radius exhaust manifold (topmount or bottom mount)
* Full 3" downpipe
* Oil and water lines
* Fittings
* Gaskets and hardware





